Traverse type servo-driven take-out robot

Cost effective model (HRXⅢ-a series)

HRXⅢ-150/250SWa･GWa

Medium size, low ceiling, 120 to 350 tons, 2-plate/3-plate compatible, low ceiling type

HRXⅢ-150/250SWa･GWa

Traverse type servo-driven take-out robot

Cost effective model (HRXⅢ-a series)

Medium size, low ceiling, 120 to 350 tons, 2-plate/3-plate compatible, low ceiling type

Click here for product PDF

HRXⅢ-150/250SWa･GWa

  IMM size
（ton）		 Maximum payload Supported Plates
(Molds)		 feature 1
HRXⅢ-150SWa 120〜250 5 2 Medium size, low ceiling
HRXⅢ-150GWa 120〜250 5 3 Medium size, low ceiling
HRXⅢ-250SWa 180〜350 5 2 Medium size, low ceiling
HRXⅢ-250GWa 180〜350 5 3 Medium size, low ceiling

Maximum payload

3kg (including attachments)

 

Controller

HRS-1400a

  •  In addition to internal memory, mold memory can be saved by USB memory stick. ( 500 memories )
  • Easy data protection and management by key switch ( no use / manual / auto)
  • Teach pendant weighs 1 kg and has a thin body of 40 mm

 

Off line programming

  • Addition of special operations and outputs can be added using a PC without stopping current production, allowing specifications to be added after installation.
  • Confirmation of the created program in 3D on a PC.

 

Group management

  • Group management of increasing mold data by customer and product

 

Free palletizing

  • Product release position can be freely set at 256 points.

 

Language support

  • 5 languages can be selected (Japanese, English, Chinese, Korean, and Thai).
  • Other European languages can be added.

 

Production control function

  • Various settings such as "automatic operation OFF at the end of production" can be made by production monitor and production environment settings.
HRS-1400a

Linkage with peripheral equipment (optional)

Total Link

Peripheral equipment settings and monitors can be collectively managed. Contributes to shorter setup time.

  • Batch automatic setting of all peripherals with mold data of a robot
  • Batch startup of all peripherals by robot
  • Batch monitoring of all peripheral equipment on the robot
See "Total Link" page
img_totallink_hero@2x

Peripheral equipment communication (HAL-NET)

Interlocking with HARMO "F series peripheral equipment" is possible. Peripheral equipment can be operated from the operation screen of the take-out robot.

HRX3-a_HAL-NET_eng

Solving problems at molding sites

Automation and manpower saving

Automatic gate cutting of molded products

HARMO's "Take-out robot x nipper device = automation" is useful to solve manpower shortage and realize 24-hour operation.

 

Case 1

A table type nipper manufacturer, which charges 3-5 million yen per unit, succeeded in dramatically reducing costs by using our servo wrist unit and wait nippers.

 

Case 2

A company that used to spend 400,000 yen per month for in-house workers to do gate cutting of 4 parts taken out by a swing-type robot from other company, realized automation by using HARMO's traverse running robot and waiting nippers. The entire cost of in-house work was reduced.

Product Specifications

[{item=[HRXⅢ-150SWa, HRXⅢ-150GWa, HRXⅢ-250SWa, HRXⅢ-250GWa], pdf_group=[{pdf=https://8087610.fs1.hubspotusercontent-na1.net/hubfs/8087610/eng-product/%E3%82%AB%E3%82%BF%E3%83%AD%E3%82%B0/HRX3-a_eng.pdf, pdf_text=Click here for product PDF}], product=[{product_item=[8.50, 11.50, 8.50, 11.50], product_name=最大所要電流（A）}], rich_text=

HRXⅢ-150SWa、HRXⅢ-150GWa、HRXⅢ-250SWa、HRXⅢ-250GWa

, set={set20={set_item=[3000, 4000, 3000, 4000], set_title=Power equipment capacity（VA）}, set10={set_item=[90, 90, 90, 90], set_title=Wrist rotation（°）}, set11={set_item=[22.7, 22.7, 22.7, 22.7], set_title=Wrist unit torque (Nm)}, set12={set_item=[5(including attachments), 5(including attachments), 5(including attachments), 5(including attachments)], set_title=Maximum Payload（kg）}, set13={set_item=[224, 245, 261, 284], set_title=Weight（kg）}, set14={set_item=[2176 × 1500 × 1158, 2176 × 1500 × 1158, 2416 × 1500 × 1436, 2416 × 1500 × 1436], set_title=Width × Depth × Height (mm)}, set15={set_item=[0.5, 0.5, 0.5, 0.5], set_title=Working air pressure (Mpa)}, set16={set_item=[1.15, 1.17, 1.15, 1.17], set_title=Air consumption ※(ℓ/cyc"ANR")}, check=true, set17={set_item=[Digital AC servo motor, Digital AC servo motor, Digital AC servo motor, Digital AC servo motor], set_title=Control method}, set18={set_item=[3-phase/Single phase  AC200V-240V ± 10%（50Hz/60Hz）, 3-phase/Single phase  AC200V-240V ± 10%（50Hz/60Hz）, 3-phase/Single phase  AC200V-240V ± 10%（50Hz/60Hz）, 3-phase/Single phase  AC200V-240V ± 10%（50Hz/60Hz）], set_title=Power Supply（V）}, set19={set_item=[1000, 1600, 1350, 1950], set_title=Maximum power consumption（W）}, set1={set_title=対象成形機（ton）}, set2={set_item=[900, 900, 1200, 1200], set_title=Main vertical stroke (mm)}, set3={set_item=[ー, 950, ー, 1250], set_title=Sub vertical stroke (mm)}, set4={set_item=[

656（144 ～ 800）

, 549（251 ～ 800）, 660（125 ～ 785）, 553（232 ～ 785）], set_title=Main kick stroke（mm）}, set5={set_item=[ー, 549（95 ～ 644）, ー, 553（80 ～ 633）], set_title=Sub kick stroke (mm)}, set6={set_item=[1400【1600】【1800】【2000】, 1400【1600】【1800】【2000】, 1600【1800】【2000】, 1600【1800】【2000】], set_title=Traverse stroke (mm)}, set7={set_item=[150, 150, 250, 250], set_title=Main home position (mm)}, set8={set_item=[800, 800, 785, 785], set_title=Maximum reach (mm)}, set9={set_item=[ー, 95, ー, 80], set_title=Sub minimum reach (mm)}}}]

HRXⅢ-150SWa、HRXⅢ-150GWa、HRXⅢ-250SWa、HRXⅢ-250GWa

  HRXⅢ-150SWa HRXⅢ-150GWa HRXⅢ-250SWa HRXⅢ-250GWa
Main vertical stroke (mm) 900 900 1200 1200
Sub vertical stroke (mm) ー 950 ー 1250
Main kick stroke（mm） 656（144 ～ 800） 549（251 ～ 800） 660（125 ～ 785） 553（232 ～ 785）
Sub kick stroke (mm) ー 549（95 ～ 644） ー 553（80 ～ 633）
Traverse stroke (mm) 1400【1600】【1800】【2000】 1400【1600】【1800】【2000】 1600【1800】【2000】 1600【1800】【2000】
Main home position (mm) 150 150 250 250
Maximum reach (mm) 800 800 785 785
Sub minimum reach (mm) ー 95 ー 80
Wrist rotation（°） 90 90 90 90
Wrist unit torque (Nm) 22.7 22.7 22.7 22.7
Maximum Payload（kg） 5(including attachments) 5(including attachments) 5(including attachments) 5(including attachments)
Weight（kg） 224 245 261 284
Width × Depth × Height (mm) 2176 × 1500 × 1158 2176 × 1500 × 1158 2416 × 1500 × 1436 2416 × 1500 × 1436
Working air pressure (Mpa) 0.5 0.5 0.5 0.5
Air consumption ※(ℓ/cyc"ANR") 1.15 1.17 1.15 1.17
Control method Digital AC servo motor Digital AC servo motor Digital AC servo motor Digital AC servo motor
Power Supply（V） 3-phase/Single phase  AC200V-240V ± 10%（50Hz/60Hz） 3-phase/Single phase  AC200V-240V ± 10%（50Hz/60Hz） 3-phase/Single phase  AC200V-240V ± 10%（50Hz/60Hz） 3-phase/Single phase  AC200V-240V ± 10%（50Hz/60Hz）
Maximum power consumption（W） 1000 1600 1350 1950
Power equipment capacity（VA） 3000 4000 3000 4000
最大所要電流（A） 8.50 11.50 8.50 11.50
  HRXⅢ-150SWa HRXⅢ-150GWa HRXⅢ-250SWa HRXⅢ-250GWa
When using vacuum ejector, 46 L/min [ANR] per set of ejectors is consumed extra.
【 】=Option

Click here for product PDF PDF

Standard Specifications

  • Product gripper 1 circuit
  • Vacuum ejector 1 circuit
  • Main sprue gripper 1 circuit
  • Multi-row placement (4 points)
  • Palletizing
  • Wrist Flip Out
  • Home position
  • Moving / Stationary Take-out
  • Pass motion (reducing the cycle time)
  • Mold changeover point
  • Product fall-out monitoring
  • Reject release
  • Initial reject release counter
  • Sampling
  • Position adjustment in auto operation
  • Undercut 3 points
  • In-mold release
  • Step confirmation operation
  • Sub arm independent control
  • Internal mold memory
  • Language switching function (5 languages)
  • Off line programming
  • Password setting
  • Auto OFF at production end
  • Back light auto dim
  • Maintenance Information
  • Log function

Option

  • Addtion of product grip 2-8 circuits
  • Addition of vacuum ejector 2-4 circuits
  • Addition of vacuum & blow circuit 1 - 8 circuits
  • Grip nipper
  • TA Wait nipper
  • Wait nipper slide valve
  • Gripper rotation mechanism
  • Traverse end pillar
  • Conveyor signal
  • Stocker signal
  • Quick change EOAT
  • Pressure monitoring
  • Air blow
  • USB memory stick
  • Exhaust cleaner
  • Specified color
  • Euromap 12
  • Euromap 67

New Information about this product

No articles found.

No articles found.

No articles found.

No articles found.

No articles found.

NEWS
We launched our new product website.

About us

We produce take-out robot and the related peripheral equipment as the comprehensive manufacturer in injection molding market. We suggest the best solutions to solve the problems that the customer have such as automation, labor saving, productivity improvement, production-defects reduction and stable quality. Please rely on us about the problems in Injection molding process.

Company name

HARMO Co., Ltd.

Business Activities

Development, manufacture and sales of industrial robots (automated pick-up equipment for injection molded parts) and streamlined auxiliary machines for plastic molding machine

Address

4124-1 Minamiminowa-mura Kamiina-gun Nagano, Japan 399-4595

Phone

+81-265-73-8820

International Marketing Department

  • Address　4124-1 Minamiminowa-mura Kamiina-gun Nagano, 399-4595
  • TEL : 0265-73-8820
  • FAX : 0265-73-8964
  • E-mail : kaigai@harmo-net.co.jp

 

  • Sales Office (Subsidiary)　Singapore, Malaysia, Thailand, Vietnam, Indonesia, Shenzhen, Shanghai, America
  • Factory　Suzhou

Sales Office (Subsidiary)

img_global_networks@2x

 

SINGAPORE

HARMO CO.,(SINGAPORE) PTE., LTD.

23TAGORE LANE #01-03 TAGORE 23 WAREHOUSE

SINGAPORE 787601

  • TEL : +65-6481-1764
  • FAX : +65-6481-6130
  • E-mail : general@harmo.com.sg

INDONESIA

Festival Boulevard Blok AA 11 No61 Grand Wisata Desa Lambangsari Kec. Tambun-Selatan Kab. Bekasi 17510

  • TEL : 021-8262-1667 / 68
  • FAX : 021-8262-1726
  • E-mail : hiro-tsuchiya@harmo-net.co.jp

MALAYSIA

HARMO CO., (MALAYSIA) SDN. BHD.

LOT 0034, KOMPLEKS SENTRAL No.33, JALAN SEGAMBUT

ATAS 51200 KUALA LUMPUR MALAYSIA

  • TEL : +60-3-6251-2057
  • E-mail : t_osaki@harmo-net.co.jp

Penang Office

HARMO CO., (MALAYSIA) SDN. BHD.

No.10, GROUND FLOOR JALAN PERAI JAYA 6, BANDAR BARU

PERAI JAYA, 13700 PERAI PENANG MALASIA

  • TEL : +60-4-3972057
  • E-mail : t_osaki@harmo-net.co.jp

THAILAND

HARMO (THAILAND) LTD.

410/71-72 SOI RATCHADAPISEK 24,RATCHADAPISEK RD., SAMSENNORK,HUAY-KWANG, BANGKOK 10310

  • TEL : +66-2-541-4287
  • FAX : +66-2-541-4286
  • E-mail : t_nakazawa@harmo-net.co.jp

SHENZHEN

HARMO MACHINERY (SHENZHEN) CO., LTD.

Room 8213, JinBao business building, 15 Shun Feng Road, 44 District,AnLe Community, Xin’an street, Baoan District, Shenzhen. China

  • TEL : (+86) 755-88868177
  • FAX : (+86) 755-83862500
  • E-mail : szoffice@harmo-net.com

SHANGHAI

HARMO MACHINERY (SHANGHAI) CO., LTD.

Room 805, North Tower,Guanghua Building, 870 Maotai Road, Changning District,Shanghai

  • TEL : +86-21-80199227
  • FAX : +86-21-80199228
  • E-mail : harmosh@harmo-net.com

Dalian Office

Room 1005, Gugeng International Hotel, No.138, Jinma Road, Dalian P.R. China 116600

  • TEL : (0411)87962819
  • FAX : (0411)87962819

Tianjin Office

Room 323，Yunhan Building,No.185,Qinjian Road,Hongqiao District,Tianjin 300130

  • TEL : (022)87355626
  • FAX : (022)87355626

Xiamen Office

Room B415, Xinxinjingdi Building, No.396, Jiahe Road, Huli District, Xiamen

  • TEL : 0592-3233250
  • FAX : 0592-3233250

VIETNAM

HARMO VIETNAM CO.,LTD

Apartment No.B2 military collective, Phu Thuong Ward, Tay Ho District, Ha Noi, Viet Nam

  • TEL : +84-24-6664-1028
  • FAX : +84-24-6664-1029
  • E-Mail : harmo@vnn.vn 

HOCHIMINH Office

Harmo America inc.

2675 American Lane Elk Grove Village IL 60007

SUZHOU

HARMO (SUZHOU) CO., LTD.

NO.15 XIANGPU ROAD, SHENGPU TOWN, SUZHOU INDUSTRIAL PARK, SUZHOU

Global agency

img_global_agency@2x

 

Korea

HANSE KOREA Co., Ltd.

#503,DAERUNG TECHNOTOWN 7CHA,489-11 GASAN-DONG,GEUMCI-KU,SEOUL,KOREA

Philippines

NPI Machinery Inc

5th Floor Orcel II Bldg. 1611 Quezon Avenue, West Triangle, Quezon City, 1100 Philippines

  • TEL: (632)926-7479
  • FAX: (632)920-3096

Taiwan

XIN JU AUTOMACHINE CORP.

NO.25,Changchun 6th Rd., Zhongli Dist., Taoyuan City 320, Taiwan(R.O.C)

  • TEL:886-3-4623797
  • FAX:886-3-4622397 

Australia

Cam-Plas Machinery Pty. Ltd.

2/30 Catherine Street, Coburg North, VICTORIA, Australia, 3058

  • TEL: +61-3-9355-7099

New Zealand

TCL Hunt Limited.

7 Fisher Crescent Mount Wellington Auckland 1060 PO Box 132-166 Sylvia Park Auckland 1644 New Zealand

Brazil

Hercx Representação de Máquinas e Equipamentos Plásticos Ltda

Alameda Princesa Isabel, 654 – São Bernardo do Campo – São Paulo, CEP 09771-110, Brazil

  • TEL: +55 11 2677-3040
  • MOBILE: +55 11 99898-6066
  • E-mail: hercules@hercx.net

Mexico

Otakara PLASTICOS

Jeronimo Trevino 3835 Col. Lopez Portillo Guadalajara, Jalisco, Mexico C.P. 44980

Israel

Multipack

3, Derech Hyam St. P.O. Box 376 81103 Yavne Israel

  • TEL: +972-8942-7325
  • FAX: +972-8942-0397

Italy

STAGE TECHNOLOGIES

ST.A.TE Technologies Srl Vail Vailate 15 / A、24040-Calvenzano（BG）

Poland

HARMO REPRESENTATIVE POLAND & EAST EUROPE

ul. Kazimierza Pułaskiego 2 64-600 Oborniki

Turkey

Aksoy Plastik ve Makine San. Tic. Ltd. Sti.

Küçükyalı İş Merkezi Girne Mah. Irmak Sok. E Blok No.4/Maltepe/İSTANBUL/TURKEY

  • TEL: +90-216-518-83-33
  • E-mail: info@aksoymakine.com

INDIA

KANEHIRO YANTRA PRIVATE LIMITED

Flat No 22, krishna Apartment, No.59, 1st Avenue, Ashok Nagar, Chennai – 600 083, Tamil Nadu, India.

Inquiries