--- title: PLA-CARRY｜Attachment｜Product website｜HARMO Co., Ltd. description: "This is the product information for \"PLA-CARRY \" attachment for injection molding chucks. ｜ HARMO Co., Ltd." image: https://eng.injection-molding.jp/hubfs/products2022/%E8%A3%BD%E5%93%81%E3%82%B5%E3%82%A4%E3%83%88%EF%BD%9COGP/%E3%83%8F%E3%83%BC%E3%83%A2%E8%A3%BD%E5%93%81%E3%82%B5%E3%82%A4%E3%83%88%7C%E3%83%88%E3%83%83%E3%83%97%E3%83%9A%E3%83%BC%E3%82%B8%7Cogp%20(1).jpg --- - [Top](https://eng.injection-molding.jp/products) - [Attachment for EOAT ](https://eng.injection-molding.jp/products/attachment) - [PLA-CARRY ](https://eng.injection-molding.jp/products/attachment/plastic-carry) Plastic high-flow air suction unit # PLA-CARRY [![Make an inquiry](https://no-cache.hubspot.com/cta/default/8087610/380cdeef-6ef5-4cae-ab6f-d70f48637a4d.png)](https://cta-redirect.hubspot.com/cta/redirect/8087610/380cdeef-6ef5-4cae-ab6f-d70f48637a4d) ![PC-501_mini](https://eng.injection-molding.jp/hs-fs/hubfs/products2022/PC-501_mini.jpg?width=400&height=264&name=PC-501_mini.jpg) - [Top](https://eng.injection-molding.jp/products/attachment/plastic-carry#tabs-1) - [Specifications](https://eng.injection-molding.jp/products/attachment/plastic-carry#tabs-2) - [Support](https://eng.injection-molding.jp/products/attachment/plastic-carry#tabs-3) ## PLA-CARRY ### PLA-CARRY is an ultra-lightweight plastic high-flow air suction unit. - The all-resin body weighs only 28g, which is about half the weight of conventional products of the same size. - Various functions in a compact body - The antistatic plastic prevents the powder from clinging - A wide variety of "mounting stays (optional)" make installation design easy - One-touch fitting for easy connection / disconnection even where the piping tube is short ![樹脂製大流量エア吸引(ブロー)装置のアイコン|株式会社ハーモ](https://eng.injection-molding.jp/hubfs/products2022/%E6%A8%B9%E8%84%82%E8%A3%BD%E5%A4%A7%E6%B5%81%E9%87%8F%E3%82%A8%E3%82%A2%E5%90%B8%E5%BC%95(%E3%83%96%E3%83%AD%E3%83%BC)%E8%A3%85%E7%BD%AE%E3%81%AE%E3%82%A2%E3%82%A4%E3%82%B3%E3%83%B3%7C%E6%A0%AA%E5%BC%8F%E4%BC%9A%E7%A4%BE%E3%83%8F%E3%83%BC%E3%83%A2.jpg) OHF (one-hand fitting) OHF Cartridge Fitting are standard. ![プラキャリー|RC18中継仕様](https://eng.injection-molding.jp/hubfs/products2022/%E3%83%97%E3%83%A9%E3%82%AD%E3%83%A3%E3%83%AA%E3%83%BC%7CRC18%E4%B8%AD%E7%B6%99%E4%BB%95%E6%A7%98.jpg) RC1/8 relay specification General fittings can be attached by "Transmitter fittings (optional)". ![プラキャリー|ワンタッチC継手仕様](https://eng.injection-molding.jp/hubfs/products2022/%E3%83%97%E3%83%A9%E3%82%AD%E3%83%A3%E3%83%AA%E3%83%BC%7C%E3%83%AF%E3%83%B3%E3%82%BF%E3%83%83%E3%83%81C%E7%B6%99%E6%89%8B%E4%BB%95%E6%A7%98.jpg) One touch fitting-C specification ### Usage Example #### Examples of fine product take-out, EOAT product suction, and vacuum breakage applications ![Equipment mounting side (1)](https://eng.injection-molding.jp/hubfs/eng-product/%E3%82%A2%E3%82%BF%E3%83%83%E3%83%81%E3%83%A1%E3%83%B3%E3%83%88/Equipment%20mounting%20side%20(1).jpg) Equipment mounting side ![Product take-out side (1)](https://eng.injection-molding.jp/hubfs/eng-product/%E3%82%A2%E3%82%BF%E3%83%83%E3%83%81%E3%83%A1%E3%83%B3%E3%83%88/Product%20take-out%20side%20(1).jpg) Product take-out side ## Standard PC-501 | Model | PC-501 | | --- | --- | | Weight (standard) | 28.0 g | | Weight (with blow-stay set) | 45.8 g | | Vacuum Break Air Circuit | Built-In Part Circuit | | Vacuum Capacity (Flow Rate/Pressure) | 280ℓ/min ／ -3.5kPa | ![Ordering Code (1)](https://eng.injection-molding.jp/hubfs/eng-product/%E3%82%A2%E3%82%BF%E3%83%83%E3%83%81%E3%83%A1%E3%83%B3%E3%83%88/Ordering%20Code%20(1).png "Ordering Code (1)") **Ordering Example** ・Vacuum Feeding Port (V) for φ8 tube ・Release feeding port (P) for φ4 tube 　**KJ501-8-4**   ・Vacuum Feeding Port (V) for RC ・Release feeding port (P) for φ6 tube **　KJ501-RC-6** ## Cartridge fitting (single item) ![OHF (one-hand fitting)](https://eng.injection-molding.jp/hs-fs/hubfs/eng-product/%E3%82%A2%E3%82%BF%E3%83%83%E3%83%81%E3%83%A1%E3%83%B3%E3%83%88/OHF%20(one-hand%20fitting).jpg?width=500&height=500&name=OHF%20(one-hand%20fitting).jpg "OHF (one-hand fitting)") **OHF (one-hand fitting)** | Part code | Item name | Specification standard | | --- | --- | --- | | TCL4 | One touch fitting for PC-501(φ4) | OHF fitting　TCLφ4 | | TCL6 | One touch fitting for PC-501(φ6) | OHF fitting　TCLφ6 | | TCL8 | One touch fitting for PC-501(φ8) | OHF fitting　TCLφ8 |   ![One touch fitting-C (1)](https://eng.injection-molding.jp/hs-fs/hubfs/eng-product/%E3%82%A2%E3%82%BF%E3%83%83%E3%83%81%E3%83%A1%E3%83%B3%E3%83%88/One%20touch%20fitting-C%20(1).jpg?width=500&height=500&name=One%20touch%20fitting-C%20(1).jpg "One touch fitting-C (1)") **One touch fitting-C** | Part code | Item name | Specification standard | | --- | --- | --- | | TCL4-P | One touch fitting-C for PC-501(φ4) | One touch fitting-C TCLφ4 | | TCL6-P | One touch fitting-C for PC-501(φ6) | One touch fitting-C TCLφ6 | | TCL8-P  | One touch fitting-C for PC-501(φ8) | One touch fitting-C TCLφ8 | ### Mounting option ![DFステー|株式会社ハーモ](https://eng.injection-molding.jp/hs-fs/hubfs/products2022/DF%E3%82%B9%E3%83%86%E3%83%BC%7C%E6%A0%AA%E5%BC%8F%E4%BC%9A%E7%A4%BE%E3%83%8F%E3%83%BC%E3%83%A2.jpg?width=300&height=300&name=DF%E3%82%B9%E3%83%86%E3%83%BC%7C%E6%A0%AA%E5%BC%8F%E4%BC%9A%E7%A4%BE%E3%83%8F%E3%83%BC%E3%83%A2.jpg "DFステー|株式会社ハーモ") **DF Stay**   Fittings with four M3 taps for mounting PC-501 directly on the wall ![DFステーセット](https://eng.injection-molding.jp/hs-fs/hubfs/products2022/DF%E3%82%B9%E3%83%86%E3%83%BC%E3%82%BB%E3%83%83%E3%83%88.jpg?width=480&height=300&name=DF%E3%82%B9%E3%83%86%E3%83%BC%E3%82%BB%E3%83%83%E3%83%88.jpg "DFステーセット") **DF Stay Kit**   DF Stay Set + Blow Stay + 4 sets of mounting screws Mounting bracket that enables various mounting methods for PC-501 | Part code | Item name | | --- | --- | | PC501-001 | DF stay (right and left) option | | PC501-002 | Blow Stay Set (option) | ## Product Specifications [{item=[Item name, Specification standard], pdf_group=[], product=[{product_item=[PLA-CARRY 501-V4-P4, Suction TCLφ4, Release TCLφ4], product_name=PC-501-V4-P4}, {product_item=[PLA-CARRY 501-V4-P6, Suction TCLφ4, Release TCLφ6], product_name=PC-501-V4-P6}, {product_item=[PLA-CARRY 501-V4-P8, Suction TCLφ4, Release TCLφ8], product_name=PC-501-V4-P8}, {product_item=[PLA-CARRY 501-V4-RC, Suction TCLφ4, Release RC1/8], product_name=PC-501-V4-RC}, {product_item=[PLA-CARRY 501-V6-P4, Suction TCLφ6, Release TCLφ6], product_name=PC-501-V6-P4}, {product_item=[PLA-CARRY 501-V6-P6, Suction TCLφ6, Release TCLφ6], product_name=PC-501-V6-P6 }, {product_item=[PLA-CARRY 501-V6-P8, Suction TCLφ6, Release TCLφ8], product_name=PC-501-V6-P8}, {product_item=[PLA-CARRY 501-V6-RC, Suction TCLφ6, Release RC1/8], product_name=PC-501-V6-RC}, {product_item=[PLA-CARRY 501-V8-P4, Suction TCLφ8, Release TCLφ4], product_name=PC-501-V8-P4}, {product_item=[PLA-CARRY 501-V8-P6, Suction TCLφ8, Release TCLφ6], product_name=PC-501-V8-P6}, {product_item=[PLA-CARRY 501-V8-P8, Suction TCLφ8, Release TCLφ8], product_name=PC-501-V8-P8}, {product_item=[PLA-CARRY 501-V8-RC, Suction TCLφ8, Release RC1/8], product_name=PC-501-V8-RC}, {product_item=[PLA-CARRY 501-RC-P4, Suction RC1/8, Release TCLφ4], product_name=PC-501-RC-P4}, {product_item=[PLA-CARRY 501-RC-P6, Suction RC1/8, Release TCLφ6], product_name=PC-501-RC-P6}, {product_item=[PLA-CARRY 501-RC-P8, Suction RC1/8, Release TCLφ8], product_name=PC-501-RC-P8}, {product_item=[PLA-CARRY 501-RC-RC, Suction RC1/8, Release RC1/8], product_name=PC-501-RC-RC}], set={set20={set_title=最大所要電流（A）}, set10={set_title=姿勢制御（°）}, set11={set_title=姿勢トルク（Nm）}, set12={set_title=姿勢トルク（Nm）}, set13={set_title=本体質量（kg）}, set14={set_title=横幅×奥行×全高（mm）}, set15={set_title=常用空気圧（MPa）}, set16={set_title=エア消費量 ※（ℓ/cyc[ANR]）}, check=false, set17={set_title=制御方式}, set18={set_title=最大消費電力（W）}, set19={set_title=電源設備容量（VA）}, set1={set_title=対象成形機（ton）}, set2={set_title=メイン上下ストローク（mm）}, set3={set_title=サブ上下ストローク（mm）}, set4={set_title=メイン前後ストローク（mm）}, set5={set_title=サブ前後ストローク（mm）}, set6={set_title=横走行ストローク（mm）}, set7={set_title=メイン待機位置（mm）}, set8={set_title=メイン最大前進位置（mm）}, set9={set_title=サブ最小寄せ付け位置（mm）}}, sub_title=OHF (one-hand fitting) specification}, {item=[Item name, Specification standard], pdf_group=[], product=[{product_item=[PLA-CARRY 501-V4-P4-P, Suction TCLφ4, Release TCLφ4], product_name=PC-501-V4-P4-P}, {product_item=[PLA-CARRY 501-V4-P6-P, Suction TCLφ4, Release TCLφ6], product_name=PC-501-V4-P6-P}, {product_item=[PLA-CARRY 501-V4-P8-P, Suction TCLφ4, Release TCLφ8], product_name=PC-501-V4-P8-P}, {product_item=[PLA-CARRY 501-V4-RC-P, Suction TCLφ4, Release RC1/8], product_name=PC-501-V4-RC-P}, {product_item=[PLA-CARRY 501-V6-P4-P, Suction TCLφ6, Release TCLφ4], product_name=PC-501-V6-P4-P}, {product_item=[PLA-CARRY 501-V6-P6-P, Suction TCLφ6, Release TCLφ6], product_name=PC-501-V6-P6-P}, {product_item=[PLA-CARRY 501-V6-P8-P, Suction TCLφ6, Release TCLφ8], product_name=PC-501-V6-P8-P}, {product_item=[PLA-CARRY 501-V6-RC-P, Suction TCLφ6, Release RC1/8], product_name=PC-501-V6-RC-P}, {product_item=[PLA-CARRY 501-V8-P4-P, Suction TCLφ8, Release TCLφ4], product_name=PC-501-V8-P4-P}, {product_item=[PLA-CARRY 501-V8-P6-P, Suction TCLφ8, Release TCLφ6], product_name=PC-501-V8-P6-P}, {product_item=[PLA-CARRY 501-V6-P8-P, Suction TCLφ6, Release TCLφ8], product_name=PC-501-V6-P8-P}, {product_item=[PLA-CARRY 501-V8-RC-P, Suction TCLφ8, Release RC1/8], product_name=PC-501-V8-RC-P}, {product_item=[PLA-CARRY 501-RC-P4-P, Suction RC1/8, Release TCLφ4], product_name=PC-501-RC-P4-P}, {product_item=[PLA-CARRY 501-RC-P6-P, Suction RC1/8, Release TCLφ6], product_name=PC-501-RC-P6-P}, {product_item=[PLA-CARRY 501-RC-P8-P, Suction RC1/8, Release TCLφ8], product_name=PC-501-RC-P8-P}], set={set20={set_title=最大所要電流（A）}, set10={set_title=姿勢制御（°）}, set11={set_title=姿勢トルク（Nm）}, set12={set_title=姿勢トルク（Nm）}, set13={set_title=本体質量（kg）}, set14={set_title=横幅×奥行×全高（mm）}, set15={set_title=常用空気圧（MPa）}, set16={set_title=エア消費量 ※（ℓ/cyc[ANR]）}, check=false, set17={set_title=制御方式}, set18={set_title=最大消費電力（W）}, set19={set_title=電源設備容量（VA）}, set1={set_title=対象成形機（ton）}, set2={set_title=メイン上下ストローク（mm）}, set3={set_title=サブ上下ストローク（mm）}, set4={set_title=メイン前後ストローク（mm）}, set5={set_title=サブ前後ストローク（mm）}, set6={set_title=横走行ストローク（mm）}, set7={set_title=メイン待機位置（mm）}, set8={set_title=メイン最大前進位置（mm）}, set9={set_title=サブ最小寄せ付け位置（mm）}}, sub_title=One touch fitting-C specification}, {item=[4, 6, 8], pdf_group=[], product=[{product_item=[24.3, 24.8, 31], product_name=A}, {product_item=[24.3, 25.8, 30], product_name=B}, {product_item=[41, 43.2, 46.2], product_name=C}, {product_item=[42.6, 45.1, 46.9], product_name=D}, {product_item=[75.7, 76.6, 85.8], product_name=E}, {product_item=[76.4, 78.6, 81.3], product_name=F}, {product_item=[7.8, 10.5, 14.5], product_name=φG}, {product_item=[10.3, 12.8, 14.7], product_name=φH}], set={set20={set_title=最大所要電流（A）}, set10={set_title=姿勢制御（°）}, set11={set_title=姿勢トルク（Nm）}, set12={set_title=姿勢トルク（Nm）}, set13={set_title=本体質量（kg）}, set14={set_title=横幅×奥行×全高（mm）}, set15={set_title=常用空気圧（MPa）}, set16={set_title=エア消費量 ※（ℓ/cyc[ANR]）}, check=false, set17={set_title=制御方式}, set18={set_title=最大消費電力（W）}, set19={set_title=電源設備容量（VA）}, set1={set_title=対象成形機（ton）}, set2={set_title=メイン上下ストローク（mm）}, set3={set_title=サブ上下ストローク（mm）}, set4={set_title=メイン前後ストローク（mm）}, set5={set_title=サブ前後ストローク（mm）}, set6={set_title=横走行ストローク（mm）}, set7={set_title=メイン待機位置（mm）}, set8={set_title=メイン最大前進位置（mm）}, set9={set_title=サブ最小寄せ付け位置（mm）}}, sub_title=Dimensions of tube size [φ] for one touch fitting-C specification}, {item=[4, 6, 8], pdf_group=[], product=[{product_item=[15.1 , 16, 25.2], product_name=A}, {product_item=[16.1, 18 , 20.7], product_name=B}, {product_item=[20.3, 21.2, 31.7], product_name=C}, {product_item=[21.3, 23.2, 25.7], product_name=D}, {product_item=[8, 10.5, 14.5], product_name=φE}, {product_item=[10.3, 23.2, 14.6], product_name=φF}], set={set20={set_title=最大所要電流（A）}, set10={set_title=姿勢制御（°）}, set11={set_title=姿勢トルク（Nm）}, set12={set_title=姿勢トルク（Nm）}, set13={set_title=本体質量（kg）}, set14={set_title=横幅×奥行×全高（mm）}, set15={set_title=常用空気圧（MPa）}, set16={set_title=エア消費量 ※（ℓ/cyc[ANR]）}, check=false, set17={set_title=制御方式}, set18={set_title=最大消費電力（W）}, set19={set_title=電源設備容量（VA）}, set1={set_title=対象成形機（ton）}, set2={set_title=メイン上下ストローク（mm）}, set3={set_title=サブ上下ストローク（mm）}, set4={set_title=メイン前後ストローク（mm）}, set5={set_title=サブ前後ストローク（mm）}, set6={set_title=横走行ストローク（mm）}, set7={set_title=メイン待機位置（mm）}, set8={set_title=メイン最大前進位置（mm）}, set9={set_title=サブ最小寄せ付け位置（mm）}}, sub_title=Dimensions of tube size [φ] for cartridge fitting}] ### OHF (one-hand fitting) specification |   | Item name | Specification standard | | --- | --- | --- | | PC-501-V4-P4 | PLA-CARRY 501-V4-P4 | Suction TCLφ4, Release TCLφ4 | | PC-501-V4-P6 | PLA-CARRY 501-V4-P6 | Suction TCLφ4, Release TCLφ6 | | PC-501-V4-P8 | PLA-CARRY 501-V4-P8 | Suction TCLφ4, Release TCLφ8 | | PC-501-V4-RC | PLA-CARRY 501-V4-RC | Suction TCLφ4, Release RC1/8 | | PC-501-V6-P4 | PLA-CARRY 501-V6-P4 | Suction TCLφ6, Release TCLφ6 | | PC-501-V6-P6 | PLA-CARRY 501-V6-P6 | Suction TCLφ6, Release TCLφ6 | | PC-501-V6-P8 | PLA-CARRY 501-V6-P8 | Suction TCLφ6, Release TCLφ8 | | PC-501-V6-RC | PLA-CARRY 501-V6-RC | Suction TCLφ6, Release RC1/8 | | PC-501-V8-P4 | PLA-CARRY 501-V8-P4 | Suction TCLφ8, Release TCLφ4 | | PC-501-V8-P6 | PLA-CARRY 501-V8-P6 | Suction TCLφ8, Release TCLφ6 | | PC-501-V8-P8 | PLA-CARRY 501-V8-P8 | Suction TCLφ8, Release TCLφ8 | | PC-501-V8-RC | PLA-CARRY 501-V8-RC | Suction TCLφ8, Release RC1/8 | | PC-501-RC-P4 | PLA-CARRY 501-RC-P4 | Suction RC1/8, Release TCLφ4 | | PC-501-RC-P6 | PLA-CARRY 501-RC-P6 | Suction RC1/8, Release TCLφ6 | | PC-501-RC-P8 | PLA-CARRY 501-RC-P8 | Suction RC1/8, Release TCLφ8 | | PC-501-RC-RC | PLA-CARRY 501-RC-RC | Suction RC1/8, Release RC1/8 | |   | Item name | Specification standard | ### One touch fitting-C specification |   | Item name | Specification standard | | --- | --- | --- | | PC-501-V4-P4-P | PLA-CARRY 501-V4-P4-P | Suction TCLφ4, Release TCLφ4 | | PC-501-V4-P6-P | PLA-CARRY 501-V4-P6-P | Suction TCLφ4, Release TCLφ6 | | PC-501-V4-P8-P | PLA-CARRY 501-V4-P8-P | Suction TCLφ4, Release TCLφ8 | | PC-501-V4-RC-P | PLA-CARRY 501-V4-RC-P | Suction TCLφ4, Release RC1/8 | | PC-501-V6-P4-P | PLA-CARRY 501-V6-P4-P | Suction TCLφ6, Release TCLφ4 | | PC-501-V6-P6-P | PLA-CARRY 501-V6-P6-P | Suction TCLφ6, Release TCLφ6 | | PC-501-V6-P8-P | PLA-CARRY 501-V6-P8-P | Suction TCLφ6, Release TCLφ8 | | PC-501-V6-RC-P | PLA-CARRY 501-V6-RC-P | Suction TCLφ6, Release RC1/8 | | PC-501-V8-P4-P | PLA-CARRY 501-V8-P4-P | Suction TCLφ8, Release TCLφ4 | | PC-501-V8-P6-P | PLA-CARRY 501-V8-P6-P | Suction TCLφ8, Release TCLφ6 | | PC-501-V6-P8-P | PLA-CARRY 501-V6-P8-P | Suction TCLφ6, Release TCLφ8 | | PC-501-V8-RC-P | PLA-CARRY 501-V8-RC-P | Suction TCLφ8, Release RC1/8 | | PC-501-RC-P4-P | PLA-CARRY 501-RC-P4-P | Suction RC1/8, Release TCLφ4 | | PC-501-RC-P6-P | PLA-CARRY 501-RC-P6-P | Suction RC1/8, Release TCLφ6 | | PC-501-RC-P8-P | PLA-CARRY 501-RC-P8-P | Suction RC1/8, Release TCLφ8 | |   | Item name | Specification standard | ### Dimensions of tube size [φ] for one touch fitting-C specification |   | 4 | 6 | 8 | | --- | --- | --- | --- | | A | 24.3 | 24.8 | 31 | | B | 24.3 | 25.8 | 30 | | C | 41 | 43.2 | 46.2 | | D | 42.6 | 45.1 | 46.9 | | E | 75.7 | 76.6 | 85.8 | | F | 76.4 | 78.6 | 81.3 | | φG | 7.8 | 10.5 | 14.5 | | φH | 10.3 | 12.8 | 14.7 | |   | 4 | 6 | 8 | ### Dimensions of tube size [φ] for cartridge fitting |   | 4 | 6 | 8 | | --- | --- | --- | --- | | A | 15.1  | 16 | 25.2 | | B | 16.1 | 18 | 20.7 | | C | 20.3 | 21.2 | 31.7 | | D | 21.3 | 23.2 | 25.7 | | φE | 8 | 10.5 | 14.5 | | φF | 10.3 | 23.2 | 14.6 | |   | 4 | 6 | 8 | ## New Information about this product No articles found. No articles found. No articles found. No articles found. No articles found. No articles found. No articles found. No articles found. No articles found. No articles found. No articles found. No articles found. No articles found. NEWS 2023.03.30 [We launched our new product website.](https://eng.injection-molding.jp/products/news/website-renewal) ## About us We produce take-out robot and the related peripheral equipment as the comprehensive manufacturer in injection molding market. We suggest the best solutions to solve the problems that the customer have such as automation, labor saving, productivity improvement, production-defects reduction and stable quality. Please rely on us about the problems in Injection molding process. #### Company name HARMO Co., Ltd. #### Business Activities Development, manufacture and sales of industrial robots (automated pick-up equipment for injection molded parts) and streamlined auxiliary machines for plastic molding machine #### Address 4124-1 Minamiminowa-mura Kamiina-gun Nagano, Japan 399-4595 #### Phone +81-265-73-8820 ## International Marketing Department - Address　4124-1 Minamiminowa-mura Kamiina-gun Nagano, 399-4595 - TEL : 0265-73-8820 - FAX : 0265-73-8964 - E-mail : [kaigai@harmo-net.co.jp](mailto:kaigai@harmo-net.co.jp)   - **Sales Office (Subsidiary)**　Singapore, Malaysia, Thailand, Vietnam, Indonesia, Shenzhen, Shanghai, America - **Factory**　Suzhou ### Sales Office (Subsidiary) ![img_global_networks@2x](https://eng.injection-molding.jp/hs-fs/hubfs/english/img_global_networks@2x.jpg?width=2200&height=1132&name=img_global_networks@2x.jpg)   #### SINGAPORE **HARMO CO.,(SINGAPORE) PTE., LTD.** 23TAGORE LANE #01-03 TAGORE 23 WAREHOUSE SINGAPORE 787601 - TEL : +65-6481-1764 - FAX : +65-6481-6130 - E-mail : general@harmo.com.sg #### INDONESIA Festival Boulevard Blok AA 11 No61 Grand Wisata Desa Lambangsari Kec. Tambun-Selatan Kab. Bekasi 17510 - TEL : 021-8262-1667 / 68 - FAX : 021-8262-1726 - E-mail : hiro-tsuchiya@harmo-net.co.jp #### MALAYSIA **HARMO CO., (MALAYSIA) SDN. BHD.** LOT 0034, KOMPLEKS SENTRAL No.33, JALAN SEGAMBUT ATAS 51200 KUALA LUMPUR MALAYSIA - TEL : +60-3-6251-2057 - E-mail : t_osaki@harmo-net.co.jp #### Penang Office **HARMO CO., (MALAYSIA) SDN. BHD.** No.10, GROUND FLOOR JALAN PERAI JAYA 6, BANDAR BARU PERAI JAYA, 13700 PERAI PENANG MALASIA - TEL : +60-4-3972057 - E-mail : t_osaki@harmo-net.co.jp #### THAILAND **HARMO (THAILAND) LTD.** 410/71-72 SOI RATCHADAPISEK 24,RATCHADAPISEK RD., SAMSENNORK,HUAY-KWANG, BANGKOK 10310 - TEL : +66-2-541-4287 - FAX : +66-2-541-4286 - E-mail : t_nakazawa@harmo-net.co.jp #### SHENZHEN **HARMO MACHINERY (SHENZHEN) CO., LTD.** Room 8213, JinBao business building, 15 Shun Feng Road, 44 District,AnLe Community, Xin’an street, Baoan District, Shenzhen. China - TEL : (+86) 755-88868177 - FAX : (+86) 755-83862500 - E-mail : szoffice@harmo-net.com #### SHANGHAI **HARMO MACHINERY (SHANGHAI) CO., LTD.** Room 805, North Tower,Guanghua Building, 870 Maotai Road, Changning District,Shanghai - TEL : +86-21-80199227 - FAX : +86-21-80199228 - E-mail : harmosh@harmo-net.com #### Dalian Office Room 1005, Gugeng International Hotel, No.138, Jinma Road, Dalian P.R. China 116600 - TEL : (0411)87962819 - FAX : (0411)87962819 #### Tianjin Office Room 323，Yunhan Building,No.185,Qinjian Road,Hongqiao District,Tianjin 300130 - TEL : (022)87355626 - FAX : (022)87355626 #### Xiamen Office Room B415, Xinxinjingdi Building, No.396, Jiahe Road, Huli District, Xiamen - TEL : 0592-3233250 - FAX : 0592-3233250 #### VIETNAM **HARMO VIETNAM CO.,LTD** Apartment No.B2 military collective, Phu Thuong Ward, Tay Ho District, Ha Noi, Viet Nam - TEL : +84-24-6664-1028 - FAX : +84-24-6664-1029 - E-Mail : harmo@vnn.vn  #### HOCHIMINH Office **Harmo America inc.** 2675 American Lane Elk Grove Village IL 60007 - TEL : +1-630-594-4116 - URL : [www.harmo-america.com](http://www.harmo-america.com/) #### SUZHOU **HARMO (SUZHOU) CO., LTD.** NO.15 XIANGPU ROAD, SHENGPU TOWN, SUZHOU INDUSTRIAL PARK, SUZHOU - TEL : (+86) 512-6295-5112 - FAX : (+86) 512-6295-5117 - URL : [www.harmo.com.cn/](http://www.harmo.com.cn/) ### Global agency ![img_global_agency@2x](https://eng.injection-molding.jp/hs-fs/hubfs/english/img_global_agency@2x.jpg?width=2200&height=1132&name=img_global_agency@2x.jpg)   #### Korea **HANSE KOREA Co., Ltd.** #503,DAERUNG TECHNOTOWN 7CHA,489-11 GASAN-DONG,GEUMCI-KU,SEOUL,KOREA - TEL: +82-2-2108-4511〜9 - FAX: +82-2-2108-4510 - URL: [http://han-se.com](http://han-se.com/) #### Philippines **NPI Machinery Inc** 5th Floor Orcel II Bldg. 1611 Quezon Avenue, West Triangle, Quezon City, 1100 Philippines - TEL: (632)926-7479 - FAX: (632)920-3096 #### Taiwan **XIN JU AUTOMACHINE CORP.** NO.25,Changchun 6th Rd., Zhongli Dist., Taoyuan City 320, Taiwan(R.O.C) - TEL:886-3-4623797 - FAX:886-3-4622397  #### Australia **Cam-Plas Machinery Pty. Ltd.** 2/30 Catherine Street, Coburg North, VICTORIA, Australia, 3058 - TEL: +61-3-9355-7099 #### New Zealand **TCL Hunt Limited.** 7 Fisher Crescent Mount Wellington Auckland 1060 PO Box 132-166 Sylvia Park Auckland 1644 New Zealand - TEL: +64-9-526-2700 - FAX: +64-9-525-0875 - URL: [https://tclhunt.co.nz/ ](https://tclhunt.co.nz/%C2%A0) #### Brazil **Hercx Representação de Máquinas e Equipamentos Plásticos Ltda** Alameda Princesa Isabel, 654 – São Bernardo do Campo – São Paulo, CEP 09771-110, Brazil - TEL: +55 11 2677-3040 - MOBILE: +55 11 99898-6066 - E-mail: hercules@hercx.net #### Mexico **Otakara PLASTICOS** Jeronimo Trevino 3835 Col. Lopez Portillo Guadalajara, Jalisco, Mexico C.P. 44980 - TEL: +52-(33)-3663-9798 - FAX: +52-(33)-3646-2364 - URL: [http://www.otakaraplasticos.com/](http://www.otakaraplasticos.com/)  #### Israel **Multipack** 3, Derech Hyam St. P.O. Box 376 81103 Yavne Israel - TEL: +972-8942-7325 - FAX: +972-8942-0397 #### Italy **STAGE TECHNOLOGIES** ST.A.TE Technologies Srl Vail Vailate 15 / A、24040-Calvenzano（BG） - TEL: 0363 8535209 - FAX: 0363 853115 - URL: [http://www.state-tech.it/](http://www.state-tech.it/) #### Poland **HARMO REPRESENTATIVE POLAND & EAST EUROPE** ul. Kazimierza Pułaskiego 2 64-600 Oborniki - TEL: +48-608-489-327 - E-mail: [ds@darsta.pl](mailto:ds@darsta.pl) - URL: [https://www.darsta.pl/](https://www.darsta.pl/) #### Turkey **Aksoy Plastik ve Makine San. Tic. Ltd. Sti.** Küçükyalı İş Merkezi Girne Mah. Irmak Sok. E Blok No.4/Maltepe/İSTANBUL/TURKEY - TEL: +90-216-518-83-33 - E-mail: info@aksoymakine.com #### INDIA **KANEHIRO YANTRA PRIVATE LIMITED** Flat No 22, krishna Apartment, No.59, 1st Avenue, Ashok Nagar, Chennai – 600 083, Tamil Nadu, India. - TEL: +91 (44) 4856-7520 - MOBILE: +91 (98) 8405-7520 - E-mail: keshavan@kanehiro.co.in - URL:[ https://www.kanehiro.co.in/](https://www.kanehiro.co.in/) ### Inquiries