--- title: Slide fitting｜Attachment｜Product website｜HARMO Co., Ltd. description: "This is the product information for \"Slide fitting \" attachment for injection molding chucks. ｜ HARMO Co., Ltd." image: https://eng.injection-molding.jp/hubfs/products2022/%E8%A3%BD%E5%93%81%E3%82%B5%E3%82%A4%E3%83%88%EF%BD%9COGP/%E3%83%8F%E3%83%BC%E3%83%A2%E8%A3%BD%E5%93%81%E3%82%B5%E3%82%A4%E3%83%88%7C%E3%83%88%E3%83%83%E3%83%97%E3%83%9A%E3%83%BC%E3%82%B8%7Cogp%20(1).jpg --- - [Top](https://eng.injection-molding.jp/products) - [Attachment for EOAT ](https://eng.injection-molding.jp/products/attachment) - [Slide fitting ](https://eng.injection-molding.jp/products/attachment/bracket-for-slide) Attachment for EOAT # Slide fitting [![Make an inquiry](https://no-cache.hubspot.com/cta/default/8087610/380cdeef-6ef5-4cae-ab6f-d70f48637a4d.png)](https://cta-redirect.hubspot.com/cta/redirect/8087610/380cdeef-6ef5-4cae-ab6f-d70f48637a4d) ![スライドレ金具のアイコン|株式会社ハーモ](https://eng.injection-molding.jp/hs-fs/hubfs/products2022/%E3%82%B9%E3%83%A9%E3%82%A4%E3%83%89%E3%83%AC%E9%87%91%E5%85%B7%E3%81%AE%E3%82%A2%E3%82%A4%E3%82%B3%E3%83%B3%7C%E6%A0%AA%E5%BC%8F%E4%BC%9A%E7%A4%BE%E3%83%8F%E3%83%BC%E3%83%A2.jpg?width=300&height=300&name=%E3%82%B9%E3%83%A9%E3%82%A4%E3%83%89%E3%83%AC%E9%87%91%E5%85%B7%E3%81%AE%E3%82%A2%E3%82%A4%E3%82%B3%E3%83%B3%7C%E6%A0%AA%E5%BC%8F%E4%BC%9A%E7%A4%BE%E3%83%8F%E3%83%BC%E3%83%A2.jpg) - [Top](https://eng.injection-molding.jp/products/attachment/bracket-for-slide#tabs-1) - [Specifications](https://eng.injection-molding.jp/products/attachment/bracket-for-slide#tabs-2) - [Support](https://eng.injection-molding.jp/products/attachment/bracket-for-slide#tabs-3) [Slide bracket, SMA Series](https://eng.injection-molding.jp/products/attachment/bracket-for-slide#a1) [Slide bracket, SMC Series](https://eng.injection-molding.jp/products/attachment/bracket-for-slide#b) [Fixing bracket, SMD Series](https://eng.injection-molding.jp/products/attachment/bracket-for-slide#c) [Angle adjustment bracket](https://eng.injection-molding.jp/products/attachment/bracket-for-slide#kakudo) [HV type](https://eng.injection-molding.jp/products/attachment/bracket-for-slide#d) ## Slide bracket, SMA Series ### SMA Series, type A-1 ##### About RoHS RoHS is an EU directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment, with the aim of eliminating or reducing the use of six substances: lead, mercury, cadmium, hexavalent chromium, PBB, and PBDEs, in principle, from 1st July, 2006. ![SMA-1 (1)](https://eng.injection-molding.jp/hubfs/products2022/SMA-1%20(1).jpg) SMA-1 - Stroke : 10 - Weight : 16 g - Material : POM ![スライド金具|SMA2-15|株式会社ハーモ](https://eng.injection-molding.jp/hubfs/products2022/%E3%82%B9%E3%83%A9%E3%82%A4%E3%83%89%E9%87%91%E5%85%B7%7CSMA2-15%7C%E6%A0%AA%E5%BC%8F%E4%BC%9A%E7%A4%BE%E3%83%8F%E3%83%BC%E3%83%A2.jpg) SMA-1-15 - Stroke : 15 - Weight : 18.4 g - Material : POM ![スライドレ金具SMA-1-20|株式会社ハーモ](https://eng.injection-molding.jp/hubfs/products2022/%E3%82%B9%E3%83%A9%E3%82%A4%E3%83%89%E3%83%AC%E9%87%91%E5%85%B7SMA-1-20%7C%E6%A0%AA%E5%BC%8F%E4%BC%9A%E7%A4%BE%E3%83%8F%E3%83%BC%E3%83%A2.jpg) SMA-1-20 - Stroke : 20 - Weight : 20.3 g - Material : POM ![スライドレ金具SMA-1-25|株式会社ハーモ](https://eng.injection-molding.jp/hubfs/products2022/%E3%82%B9%E3%83%A9%E3%82%A4%E3%83%89%E3%83%AC%E9%87%91%E5%85%B7SMA-1-25%7C%E6%A0%AA%E5%BC%8F%E4%BC%9A%E7%A4%BE%E3%83%8F%E3%83%BC%E3%83%A2.jpg) SMA-1-25 - Stroke : 25 - Weight : 20.3 g - Material : POM ![スライドレ金具SMA-1-25|株式会社ハーモ](https://eng.injection-molding.jp/hubfs/products2022/%E3%82%B9%E3%83%A9%E3%82%A4%E3%83%89%E3%83%AC%E9%87%91%E5%85%B7SMA-1-25%7C%E6%A0%AA%E5%BC%8F%E4%BC%9A%E7%A4%BE%E3%83%8F%E3%83%BC%E3%83%A2.jpg) SMA-1-30 - Stroke : 30 - Weight : 24.6 g - Material : POM ### SMA Series, type A-2 ##### About RoHS RoHS is an EU directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment, with the aim of eliminating or reducing the use of six substances: lead, mercury, cadmium, hexavalent chromium, PBB, and PBDEs, in principle, from 1st July, 2006. ![スライド金具|SMA2|株式会社ハーモ](https://eng.injection-molding.jp/hubfs/products2022/%E3%82%B9%E3%83%A9%E3%82%A4%E3%83%89%E9%87%91%E5%85%B7%7CSMA2%7C%E6%A0%AA%E5%BC%8F%E4%BC%9A%E7%A4%BE%E3%83%8F%E3%83%BC%E3%83%A2.jpg) SMA-2 - Stroke : 10 - Weight : 16 g - Material : POM ![スライド金具|SMA2-15|株式会社ハーモ](https://eng.injection-molding.jp/hubfs/products2022/%E3%82%B9%E3%83%A9%E3%82%A4%E3%83%89%E9%87%91%E5%85%B7%7CSMA2-15%7C%E6%A0%AA%E5%BC%8F%E4%BC%9A%E7%A4%BE%E3%83%8F%E3%83%BC%E3%83%A2.jpg) SMA-2-15 - Stroke : 15 - Weight : 18 g - Material : POM ![スライド金具|SMA2-20|株式会社ハーモ](https://eng.injection-molding.jp/hubfs/products2022/%E3%82%B9%E3%83%A9%E3%82%A4%E3%83%89%E9%87%91%E5%85%B7%7CSMA2-20%7C%E6%A0%AA%E5%BC%8F%E4%BC%9A%E7%A4%BE%E3%83%8F%E3%83%BC%E3%83%A2.jpg) SMA-2-20 - Stroke : 20 - Weight : 20.2 g - Material : POM ![スライド金具|SMA2-25|株式会社ハーモ](https://eng.injection-molding.jp/hubfs/products2022/%E3%82%B9%E3%83%A9%E3%82%A4%E3%83%89%E9%87%91%E5%85%B7%7CSMA2-25%7C%E6%A0%AA%E5%BC%8F%E4%BC%9A%E7%A4%BE%E3%83%8F%E3%83%BC%E3%83%A2.jpg) SMA-2-25 - Stroke : 25 - Weight : 22.2 g - Material : POM ![スライド金具|SMA2-30|株式会社ハーモ](https://eng.injection-molding.jp/hubfs/products2022/%E3%82%B9%E3%83%A9%E3%82%A4%E3%83%89%E9%87%91%E5%85%B7%7CSMA2-30%7C%E6%A0%AA%E5%BC%8F%E4%BC%9A%E7%A4%BE%E3%83%8F%E3%83%BC%E3%83%A2.jpg) SMA-2-30 - Stroke : 30 - Weight : 24.2 g - Material : POM ## Slide bracket, SMC Series ### SMC-1、SMC-2 ![スライド金具|SMC-1|株式会社ハーモ](https://eng.injection-molding.jp/hubfs/products2022/%E3%82%B9%E3%83%A9%E3%82%A4%E3%83%89%E9%87%91%E5%85%B7%7CSMC-1%7C%E6%A0%AA%E5%BC%8F%E4%BC%9A%E7%A4%BE%E3%83%8F%E3%83%BC%E3%83%A2.jpg) SMC-1 - Stroke : 10 - Weight : 25 g ![スライド金具|SMC-2|株式会社ハーモ](https://eng.injection-molding.jp/hubfs/products2022/%E3%82%B9%E3%83%A9%E3%82%A4%E3%83%89%E9%87%91%E5%85%B7%7CSMC-2%7C%E6%A0%AA%E5%BC%8F%E4%BC%9A%E7%A4%BE%E3%83%8F%E3%83%BC%E3%83%A2.jpg) SMC-2 - Stroke : 10 - Weight : 25 g ## Fixing bracket, SMD Series ### SMD-1、SMD-2 ![スライド金具|SMD-1|株式会社ハーモ](https://eng.injection-molding.jp/hubfs/%E3%82%B9%E3%83%A9%E3%82%A4%E3%83%89%E9%87%91%E5%85%B7%7CSMD-1%7C%E6%A0%AA%E5%BC%8F%E4%BC%9A%E7%A4%BE%E3%83%8F%E3%83%BC%E3%83%A2.jpg) SMD-1 - Weight : 11 g ![スライド金具|SMD-2|株式会社ハーモ](https://eng.injection-molding.jp/hubfs/products2022/%E3%82%B9%E3%83%A9%E3%82%A4%E3%83%89%E9%87%91%E5%85%B7%7CSMD-2%7C%E6%A0%AA%E5%BC%8F%E4%BC%9A%E7%A4%BE%E3%83%8F%E3%83%BC%E3%83%A2.jpg) SMD-2 - Weight : 11 g ## Angle adjustment bracket ### Angle adjustment bracket Assy for SMA-1, SMA-2 ![SMA9000|角度調整金具L Assy (1)](https://eng.injection-molding.jp/hubfs/SMA9000%7C%E8%A7%92%E5%BA%A6%E8%AA%BF%E6%95%B4%E9%87%91%E5%85%B7L%20Assy%20(1).jpg) Angle adjustment bracket L Assy - Part code : SMA9001 - Weight : 71 g - Material : SPCC ![SMA9001|角度調整金具S Assy](https://eng.injection-molding.jp/hubfs/products2022/SMA9001%7C%E8%A7%92%E5%BA%A6%E8%AA%BF%E6%95%B4%E9%87%91%E5%85%B7S%20Assy.jpg) Angle adjustment bracket S Assy - Part code : SMA9001 - Weight : 66 g - Material : SPCC ### Angle adjustment bracket for SMA ![SMA用 角度調整 金具B](https://eng.injection-molding.jp/hubfs/products2022/SMA%E7%94%A8%20%E8%A7%92%E5%BA%A6%E8%AA%BF%E6%95%B4%20%E9%87%91%E5%85%B7B.jpg) B for SMA - Part code SMAKB SMAKL SMAKS - Weight 30g 34g 29g - Material SPCC ![SMA用角度調整金具L](https://eng.injection-molding.jp/hubfs/products2022/SMA%E7%94%A8%E8%A7%92%E5%BA%A6%E8%AA%BF%E6%95%B4%E9%87%91%E5%85%B7L.jpg) L for SMA - Part code SMAKL - Weight 34g - Material SPCC ![SMA用角度調整金具S](https://eng.injection-molding.jp/hubfs/products2022/SMA%E7%94%A8%E8%A7%92%E5%BA%A6%E8%AA%BF%E6%95%B4%E9%87%91%E5%85%B7S.jpg) S for SMA - Part code SMAKS - Weight 29g - Material SPCC ## HV type (Spring return, Magnet return) ### About 80 different set are available - In addition to the conventional slide bracket for vacuum (holder size M16), the following is a list of "Holder size M6 type" and "Holder size M12 type" slide brackets designed for vacuuming smaller products and the vacuum pads that can be used with these brackets. - Approximately 80 different sets are available for various combinations of strokes, slide return mechanisms, adapters for vacuum pads, etc.   ### About Return Mechanism #### Spring return type Conventional return type. This is an affordable type that places a spring inside the holder and uses the force of the spring to return the slide bracket. #### Magnet return type While spring return type may weaken in return force as it ages, this type, which uses magnet force to return, maintains return force semi-permanently. (Spring maintenance free) *Please be careful with products, secondary processing machines, and molds because of the magnetic force generated. ### About rotation preventive type In general types, products may rotate when vacuumed with a single slide bracket, but this type is equipped with an anti-rotation mechanism to prevent products from rotating. ## Catalogue of Slide bracket **[SMA, SMC, SMD Product Catalog](https://eng.injection-molding.jp/hubfs/catalog/chuckparts_V08_eng_Slidefitting.pdf) ** **[HV Series Product Catalog](https://eng.injection-molding.jp/hubfs/catalog/chuckparts_V08_eng_Slidefitting_HV.pdf) ** ## New Information about this product No articles found. No articles found. No articles found. No articles found. No articles found. No articles found. No articles found. No articles found. No articles found. No articles found. No articles found. No articles found. No articles found. NEWS 2023.03.30 [We launched our new product website.](https://eng.injection-molding.jp/products/news/website-renewal) ## About us We produce take-out robot and the related peripheral equipment as the comprehensive manufacturer in injection molding market. We suggest the best solutions to solve the problems that the customer have such as automation, labor saving, productivity improvement, production-defects reduction and stable quality. Please rely on us about the problems in Injection molding process. #### Company name HARMO Co., Ltd. #### Business Activities Development, manufacture and sales of industrial robots (automated pick-up equipment for injection molded parts) and streamlined auxiliary machines for plastic molding machine #### Address 4124-1 Minamiminowa-mura Kamiina-gun Nagano, Japan 399-4595 #### Phone +81-265-73-8820 ## International Marketing Department - Address　4124-1 Minamiminowa-mura Kamiina-gun Nagano, 399-4595 - TEL : 0265-73-8820 - FAX : 0265-73-8964 - E-mail : [kaigai@harmo-net.co.jp](mailto:kaigai@harmo-net.co.jp)   - **Sales Office (Subsidiary)**　Singapore, Malaysia, Thailand, Vietnam, Indonesia, Shenzhen, Shanghai, America - **Factory**　Suzhou ### Sales Office (Subsidiary) ![img_global_networks@2x](https://eng.injection-molding.jp/hs-fs/hubfs/english/img_global_networks@2x.jpg?width=2200&height=1132&name=img_global_networks@2x.jpg)   #### SINGAPORE **HARMO CO.,(SINGAPORE) PTE., LTD.** 23TAGORE LANE #01-03 TAGORE 23 WAREHOUSE SINGAPORE 787601 - TEL : +65-6481-1764 - FAX : +65-6481-6130 - E-mail : general@harmo.com.sg #### INDONESIA Festival Boulevard Blok AA 11 No61 Grand Wisata Desa Lambangsari Kec. Tambun-Selatan Kab. Bekasi 17510 - TEL : 021-8262-1667 / 68 - FAX : 021-8262-1726 - E-mail : hiro-tsuchiya@harmo-net.co.jp #### MALAYSIA **HARMO CO., (MALAYSIA) SDN. BHD.** LOT 0034, KOMPLEKS SENTRAL No.33, JALAN SEGAMBUT ATAS 51200 KUALA LUMPUR MALAYSIA - TEL : +60-3-6251-2057 - E-mail : t_osaki@harmo-net.co.jp #### Penang Office **HARMO CO., (MALAYSIA) SDN. BHD.** No.10, GROUND FLOOR JALAN PERAI JAYA 6, BANDAR BARU PERAI JAYA, 13700 PERAI PENANG MALASIA - TEL : +60-4-3972057 - E-mail : t_osaki@harmo-net.co.jp #### THAILAND **HARMO (THAILAND) LTD.** 410/71-72 SOI RATCHADAPISEK 24,RATCHADAPISEK RD., SAMSENNORK,HUAY-KWANG, BANGKOK 10310 - TEL : +66-2-541-4287 - FAX : +66-2-541-4286 - E-mail : t_nakazawa@harmo-net.co.jp #### SHENZHEN **HARMO MACHINERY (SHENZHEN) CO., LTD.** Room 8213, JinBao business building, 15 Shun Feng Road, 44 District,AnLe Community, Xin’an street, Baoan District, Shenzhen. China - TEL : (+86) 755-88868177 - FAX : (+86) 755-83862500 - E-mail : szoffice@harmo-net.com #### SHANGHAI **HARMO MACHINERY (SHANGHAI) CO., LTD.** Room 805, North Tower,Guanghua Building, 870 Maotai Road, Changning District,Shanghai - TEL : +86-21-80199227 - FAX : +86-21-80199228 - E-mail : harmosh@harmo-net.com #### Dalian Office Room 1005, Gugeng International Hotel, No.138, Jinma Road, Dalian P.R. China 116600 - TEL : (0411)87962819 - FAX : (0411)87962819 #### Tianjin Office Room 323，Yunhan Building,No.185,Qinjian Road,Hongqiao District,Tianjin 300130 - TEL : (022)87355626 - FAX : (022)87355626 #### Xiamen Office Room B415, Xinxinjingdi Building, No.396, Jiahe Road, Huli District, Xiamen - TEL : 0592-3233250 - FAX : 0592-3233250 #### VIETNAM **HARMO VIETNAM CO.,LTD** Apartment No.B2 military collective, Phu Thuong Ward, Tay Ho District, Ha Noi, Viet Nam - TEL : +84-24-6664-1028 - FAX : +84-24-6664-1029 - E-Mail : harmo@vnn.vn  #### HOCHIMINH Office **Harmo America inc.** 2675 American Lane Elk Grove Village IL 60007 - TEL : +1-630-594-4116 - URL : [www.harmo-america.com](http://www.harmo-america.com/) #### SUZHOU **HARMO (SUZHOU) CO., LTD.** NO.15 XIANGPU ROAD, SHENGPU TOWN, SUZHOU INDUSTRIAL PARK, SUZHOU - TEL : (+86) 512-6295-5112 - FAX : (+86) 512-6295-5117 - URL : [www.harmo.com.cn/](http://www.harmo.com.cn/) ### Global agency ![img_global_agency@2x](https://eng.injection-molding.jp/hs-fs/hubfs/english/img_global_agency@2x.jpg?width=2200&height=1132&name=img_global_agency@2x.jpg)   #### Korea **HANSE KOREA Co., Ltd.** #503,DAERUNG TECHNOTOWN 7CHA,489-11 GASAN-DONG,GEUMCI-KU,SEOUL,KOREA - TEL: +82-2-2108-4511〜9 - FAX: +82-2-2108-4510 - URL: [http://han-se.com](http://han-se.com/) #### Philippines **NPI Machinery Inc** 5th Floor Orcel II Bldg. 1611 Quezon Avenue, West Triangle, Quezon City, 1100 Philippines - TEL: (632)926-7479 - FAX: (632)920-3096 #### Taiwan **XIN JU AUTOMACHINE CORP.** NO.25,Changchun 6th Rd., Zhongli Dist., Taoyuan City 320, Taiwan(R.O.C) - TEL:886-3-4623797 - FAX:886-3-4622397  #### Australia **Cam-Plas Machinery Pty. Ltd.** 2/30 Catherine Street, Coburg North, VICTORIA, Australia, 3058 - TEL: +61-3-9355-7099 #### New Zealand **TCL Hunt Limited.** 7 Fisher Crescent Mount Wellington Auckland 1060 PO Box 132-166 Sylvia Park Auckland 1644 New Zealand - TEL: +64-9-526-2700 - FAX: +64-9-525-0875 - URL: [https://tclhunt.co.nz/ ](https://tclhunt.co.nz/%C2%A0) #### Brazil **Hercx Representação de Máquinas e Equipamentos Plásticos Ltda** Alameda Princesa Isabel, 654 – São Bernardo do Campo – São Paulo, CEP 09771-110, Brazil - TEL: +55 11 2677-3040 - MOBILE: +55 11 99898-6066 - E-mail: hercules@hercx.net #### Mexico **Otakara PLASTICOS** Jeronimo Trevino 3835 Col. Lopez Portillo Guadalajara, Jalisco, Mexico C.P. 44980 - TEL: +52-(33)-3663-9798 - FAX: +52-(33)-3646-2364 - URL: [http://www.otakaraplasticos.com/](http://www.otakaraplasticos.com/)  #### Israel **Multipack** 3, Derech Hyam St. P.O. Box 376 81103 Yavne Israel - TEL: +972-8942-7325 - FAX: +972-8942-0397 #### Italy **STAGE TECHNOLOGIES** ST.A.TE Technologies Srl Vail Vailate 15 / A、24040-Calvenzano（BG） - TEL: 0363 8535209 - FAX: 0363 853115 - URL: [http://www.state-tech.it/](http://www.state-tech.it/) #### Poland **HARMO REPRESENTATIVE POLAND & EAST EUROPE** ul. Kazimierza Pułaskiego 2 64-600 Oborniki - TEL: +48-608-489-327 - E-mail: [ds@darsta.pl](mailto:ds@darsta.pl) - URL: [https://www.darsta.pl/](https://www.darsta.pl/) #### Turkey **Aksoy Plastik ve Makine San. Tic. Ltd. Sti.** Küçükyalı İş Merkezi Girne Mah. Irmak Sok. E Blok No.4/Maltepe/İSTANBUL/TURKEY - TEL: +90-216-518-83-33 - E-mail: info@aksoymakine.com #### INDIA **KANEHIRO YANTRA PRIVATE LIMITED** Flat No 22, krishna Apartment, No.59, 1st Avenue, Ashok Nagar, Chennai – 600 083, Tamil Nadu, India. - TEL: +91 (44) 4856-7520 - MOBILE: +91 (98) 8405-7520 - E-mail: keshavan@kanehiro.co.in - URL:[ https://www.kanehiro.co.in/](https://www.kanehiro.co.in/) ### Inquiries