--- title: LXⅡ-15 description: "This is the product information for \"LXⅡ-15\" injection molding take-out robot. ｜ HARMO Co., Ltd." image: https://eng.injection-molding.jp/hubfs/eng-product/ogp/LXII-15%7CHARMO%20Co.%2c%20Ltd.jpg --- - [Top](https://eng.injection-molding.jp/products) - [Robot](https://eng.injection-molding.jp/products/robot) - [LXⅡ series ](https://eng.injection-molding.jp/products/robot#anchor104926297915) - LXⅡ-15 Take out robot for Compact Injection Molding Machine｜LXⅡ Series Small swing high cycle type # LXⅡ-15 Ideal for hoop molding take-out from horizontal molding machines ![取出ロボット｜LXⅡ-15｜株式会社ハーモ](https://eng.injection-molding.jp/hs-fs/hubfs/products2022/LX2-15_mini.jpg?width=1254&height=1658&name=LX2-15_mini.jpg) - [Top](https://eng.injection-molding.jp/products/robot/lx2-15#tabs-1) - [Specifications](https://eng.injection-molding.jp/products/robot/lx2-15#tabs-2) - [Support](https://eng.injection-molding.jp/products/robot/lx2-15#tabs-3) ## Small swing high cycle type #### Ideal for hoop molding take-out from horizontal molding machines ### LXⅡ-15 |   | IMM size （ton） | Maximum payload | Supported Plates (Molds) | | --- | --- | --- | --- | | LXⅡ-15 | 15〜30 | Only sprues | 2 | ### The most suitable robot for following cases. - Micro molding products such as connectors - Frequent mold changes - Mold with transfer unit or core extraction cylinder, etc. - Hoop molding of horizontal molding machine ### Other product features - High-speed operation is possible by using a single motor to perform mold entry and traverse motions. Compared to conventional air swing type robots, the take-out time is reduced by about 60%, resulting in improved productivity. - High-speed operation is possible by using a single motor to perform mold entry and traverse motions. Compared to conventional air swing type robots, the take-out time is reduced by about 60%, resulting in improved productivity. - The stroke adjustment is hand-operated, eliminating the need for work on the molding machine. This ensures operator safety and reduces setup time. - The arm goes to the standby position with one touch of a button, making mold changing much easier. - The standby position is offset to the outside of the molding machine, so it can be installed even when the equipment is on the mold.   ![LX-15_Swing_mini](https://eng.injection-molding.jp/hs-fs/hubfs/products2022/LX-15_Swing_mini.jpg?width=255&height=300&name=LX-15_Swing_mini.jpg) ### Maximum payload Only sprues ## Controller ### HRS-710 - Compact, hand-held, plastic teach pendant. - Easy-to-see 3.5 inch color LCD display - 2 languages can be selected (Japanese / English) - EEPROM storage without the memory backup battery - 50 mold memories - HELP function with the quick one-line description - Easy to identify the key switches function; setting or operational, to improve the operability ![HRS700](https://eng.injection-molding.jp/hs-fs/hubfs/products2022/HRS700-1.jpg?width=300&height=300&name=HRS700-1.jpg) ## Product Specifications [{item=[LXⅡ-15], pdf_group=[{pdf=https://8087610.fs1.hubspotusercontent-na1.net/hubfs/8087610/catalog/sogo10-r95r96.pdf, pdf_text=Click here for product PDF}], product=[{product_item=[375], product_name=Main arm stroke (mm)}, {product_item=[827 (from the nozzle center)], product_name=Second descent point (mm)}, {product_item=[Approx. 140 (Adjustable when the arm is rotating by 60 degrees) *1], product_name=Maximum grip height}, {product_item=[440], product_name=Maximum reach (mm)}, {product_item=[70], product_name=Minimum reach (mm)}, {product_item=[Only sprues], product_name=Maximum payload (Kg)}, {product_item=[30], product_name=Weight (Excluding the controller) (Kg)}, {product_item=[0.5], product_name=Working air pressure (Mpa)}, {product_item=[0.1 ※ 2], product_name=Air consumption (ℓ/cyc"ANR")}, {product_item=[Single Phase 200AC（50Hz/60Hz）], product_name=Power supply (V)}, {product_item=[600], product_name=Power consumption (W)}], rich_text= LXⅡ-15 }] LXⅡ-15 |   | LXⅡ-15 | | --- | --- | | Main arm stroke (mm) | 375 | | Second descent point (mm) | 827 (from the nozzle center) | | Maximum grip height | Approx. 140 (Adjustable when the arm is rotating by 60 degrees) *1 | | Maximum reach (mm) | 440 | | Minimum reach (mm) | 70 | | Maximum payload (Kg) | Only sprues | | Weight (Excluding the controller) (Kg) | 30 | | Working air pressure (Mpa) | 0.5 | | Air consumption (ℓ/cyc"ANR") | 0.1 ※ 2 | | Power supply (V) | Single Phase 200AC（50Hz/60Hz） | | Power consumption (W) | 600 | |   | LXⅡ-15 | ※1) In the case of standard operation and standby position setting with "standby for approach" selected. ※2）The air consumption figure is for standard models. [![](https://eng.injection-molding.jp/hubfs/products2022/ico_angle_right_blue.svg)Click here for product PDF ![PDF](https://eng.injection-molding.jp/hubfs/products2022/ico_pdf.svg)](https://eng.injection-molding.jp/hubfs/catalog/sogo10-r95r96.pdf) ## Option - Working area indication frame - Molding machine connection 4 inputs. (teminal relay) - Molding machine connection input6 points (universal relay) - Molding machine connection 8 inputs. (teminal relay) - Molding machine connection 4 inputs. (universal relay) - Program copy (small HRS) ## New Information about this product No articles found. No articles found. No articles found. No articles found. No articles found. No articles found. No articles found. No articles found. No articles found. No articles found. No articles found. No articles found. No articles found. NEWS 2023.03.30 [We launched our new product website.](https://eng.injection-molding.jp/products/news/website-renewal) ## About us We produce take-out robot and the related peripheral equipment as the comprehensive manufacturer in injection molding market. We suggest the best solutions to solve the problems that the customer have such as automation, labor saving, productivity improvement, production-defects reduction and stable quality. Please rely on us about the problems in Injection molding process. #### Company name HARMO Co., Ltd. #### Business Activities Development, manufacture and sales of industrial robots (automated pick-up equipment for injection molded parts) and streamlined auxiliary machines for plastic molding machine #### Address 4124-1 Minamiminowa-mura Kamiina-gun Nagano, Japan 399-4595 #### Phone +81-265-73-8820 ## International Marketing Department - Address　4124-1 Minamiminowa-mura Kamiina-gun Nagano, 399-4595 - TEL : 0265-73-8820 - FAX : 0265-73-8964 - E-mail : [kaigai@harmo-net.co.jp](mailto:kaigai@harmo-net.co.jp)   - **Sales Office (Subsidiary)**　Singapore, Malaysia, Thailand, Vietnam, Indonesia, Shenzhen, Shanghai, America - **Factory**　Suzhou ### Sales Office (Subsidiary) ![img_global_networks@2x](https://eng.injection-molding.jp/hs-fs/hubfs/english/img_global_networks@2x.jpg?width=2200&height=1132&name=img_global_networks@2x.jpg)   #### SINGAPORE **HARMO CO.,(SINGAPORE) PTE., LTD.** 23TAGORE LANE #01-03 TAGORE 23 WAREHOUSE SINGAPORE 787601 - TEL : +65-6481-1764 - FAX : +65-6481-6130 - E-mail : general@harmo.com.sg #### INDONESIA Festival Boulevard Blok AA 11 No61 Grand Wisata Desa Lambangsari Kec. Tambun-Selatan Kab. Bekasi 17510 - TEL : 021-8262-1667 / 68 - FAX : 021-8262-1726 - E-mail : hiro-tsuchiya@harmo-net.co.jp #### MALAYSIA **HARMO CO., (MALAYSIA) SDN. BHD.** LOT 0034, KOMPLEKS SENTRAL No.33, JALAN SEGAMBUT ATAS 51200 KUALA LUMPUR MALAYSIA - TEL : +60-3-6251-2057 - E-mail : t_osaki@harmo-net.co.jp #### Penang Office **HARMO CO., (MALAYSIA) SDN. BHD.** No.10, GROUND FLOOR JALAN PERAI JAYA 6, BANDAR BARU PERAI JAYA, 13700 PERAI PENANG MALASIA - TEL : +60-4-3972057 - E-mail : t_osaki@harmo-net.co.jp #### THAILAND **HARMO (THAILAND) LTD.** 410/71-72 SOI RATCHADAPISEK 24,RATCHADAPISEK RD., SAMSENNORK,HUAY-KWANG, BANGKOK 10310 - TEL : +66-2-541-4287 - FAX : +66-2-541-4286 - E-mail : t_nakazawa@harmo-net.co.jp #### SHENZHEN **HARMO MACHINERY (SHENZHEN) CO., LTD.** Room 8213, JinBao business building, 15 Shun Feng Road, 44 District,AnLe Community, Xin’an street, Baoan District, Shenzhen. China - TEL : (+86) 755-88868177 - FAX : (+86) 755-83862500 - E-mail : szoffice@harmo-net.com #### SHANGHAI **HARMO MACHINERY (SHANGHAI) CO., LTD.** Room 805, North Tower,Guanghua Building, 870 Maotai Road, Changning District,Shanghai - TEL : +86-21-80199227 - FAX : +86-21-80199228 - E-mail : harmosh@harmo-net.com #### Dalian Office Room 1005, Gugeng International Hotel, No.138, Jinma Road, Dalian P.R. China 116600 - TEL : (0411)87962819 - FAX : (0411)87962819 #### Tianjin Office Room 323，Yunhan Building,No.185,Qinjian Road,Hongqiao District,Tianjin 300130 - TEL : (022)87355626 - FAX : (022)87355626 #### Xiamen Office Room B415, Xinxinjingdi Building, No.396, Jiahe Road, Huli District, Xiamen - TEL : 0592-3233250 - FAX : 0592-3233250 #### VIETNAM **HARMO VIETNAM CO.,LTD** Apartment No.B2 military collective, Phu Thuong Ward, Tay Ho District, Ha Noi, Viet Nam - TEL : +84-24-6664-1028 - FAX : +84-24-6664-1029 - E-Mail : harmo@vnn.vn  #### HOCHIMINH Office **Harmo America inc.** 2675 American Lane Elk Grove Village IL 60007 - TEL : +1-630-594-4116 - URL : [www.harmo-america.com](http://www.harmo-america.com/) #### SUZHOU **HARMO (SUZHOU) CO., LTD.** NO.15 XIANGPU ROAD, SHENGPU TOWN, SUZHOU INDUSTRIAL PARK, SUZHOU - TEL : (+86) 512-6295-5112 - FAX : (+86) 512-6295-5117 - URL : [www.harmo.com.cn/](http://www.harmo.com.cn/) ### Global agency ![img_global_agency@2x](https://eng.injection-molding.jp/hs-fs/hubfs/english/img_global_agency@2x.jpg?width=2200&height=1132&name=img_global_agency@2x.jpg)   #### Korea **HANSE KOREA Co., Ltd.** #503,DAERUNG TECHNOTOWN 7CHA,489-11 GASAN-DONG,GEUMCI-KU,SEOUL,KOREA - TEL: +82-2-2108-4511〜9 - FAX: +82-2-2108-4510 - URL: [http://han-se.com](http://han-se.com/) #### Philippines **NPI Machinery Inc** 5th Floor Orcel II Bldg. 1611 Quezon Avenue, West Triangle, Quezon City, 1100 Philippines - TEL: (632)926-7479 - FAX: (632)920-3096 #### Taiwan **XIN JU AUTOMACHINE CORP.** NO.25,Changchun 6th Rd., Zhongli Dist., Taoyuan City 320, Taiwan(R.O.C) - TEL:886-3-4623797 - FAX:886-3-4622397  #### Australia **Cam-Plas Machinery Pty. Ltd.** 2/30 Catherine Street, Coburg North, VICTORIA, Australia, 3058 - TEL: +61-3-9355-7099 #### New Zealand **TCL Hunt Limited.** 7 Fisher Crescent Mount Wellington Auckland 1060 PO Box 132-166 Sylvia Park Auckland 1644 New Zealand - TEL: +64-9-526-2700 - FAX: +64-9-525-0875 - URL: [https://tclhunt.co.nz/ ](https://tclhunt.co.nz/%C2%A0) #### Brazil **Hercx Representação de Máquinas e Equipamentos Plásticos Ltda** Alameda Princesa Isabel, 654 – São Bernardo do Campo – São Paulo, CEP 09771-110, Brazil - TEL: +55 11 2677-3040 - MOBILE: +55 11 99898-6066 - E-mail: hercules@hercx.net #### Mexico **Otakara PLASTICOS** Jeronimo Trevino 3835 Col. Lopez Portillo Guadalajara, Jalisco, Mexico C.P. 44980 - TEL: +52-(33)-3663-9798 - FAX: +52-(33)-3646-2364 - URL: [http://www.otakaraplasticos.com/](http://www.otakaraplasticos.com/)  #### Israel **Multipack** 3, Derech Hyam St. P.O. Box 376 81103 Yavne Israel - TEL: +972-8942-7325 - FAX: +972-8942-0397 #### Italy **STAGE TECHNOLOGIES** ST.A.TE Technologies Srl Vail Vailate 15 / A、24040-Calvenzano（BG） - TEL: 0363 8535209 - FAX: 0363 853115 - URL: [http://www.state-tech.it/](http://www.state-tech.it/) #### Poland **HARMO REPRESENTATIVE POLAND & EAST EUROPE** ul. Kazimierza Pułaskiego 2 64-600 Oborniki - TEL: +48-608-489-327 - E-mail: [ds@darsta.pl](mailto:ds@darsta.pl) - URL: [https://www.darsta.pl/](https://www.darsta.pl/) #### Turkey **Aksoy Plastik ve Makine San. Tic. Ltd. Sti.** Küçükyalı İş Merkezi Girne Mah. Irmak Sok. E Blok No.4/Maltepe/İSTANBUL/TURKEY - TEL: +90-216-518-83-33 - E-mail: info@aksoymakine.com #### INDIA **KANEHIRO YANTRA PRIVATE LIMITED** Flat No 22, krishna Apartment, No.59, 1st Avenue, Ashok Nagar, Chennai – 600 083, Tamil Nadu, India. - TEL: +91 (44) 4856-7520 - MOBILE: +91 (98) 8405-7520 - E-mail: keshavan@kanehiro.co.in - URL:[ https://www.kanehiro.co.in/](https://www.kanehiro.co.in/) ## LXⅡ series ### Inquiries