Losses due to human error in machine settings at the molding site

1. Delay in starting automatic molding operation due to delay in turning on the dehumidifying dryer and mold temperature controller.
2. Incorrect input of set temperature to the dehumidifying dryer and mold temperature controller.
3. Defective products due to the start of automatic molding operation when the drying time has not been reached or the mold temperature has not been raised.
4. Mismatch between mold and EOAT.　Causes mold damage and EOAT damage.

Do you have any of these problems?

Harmo has developed robots, dehumidifying dryers, and mold temperature controllers in-house.
If you have losses due to human error in 1) to 4), please consider Harmo's Total Link for the best solution.

Please contact your local Harmo for more information.
Total Link is committed to eliminating human error as described above, as well as to preventing defective products.
All of us at Harmo look forward to hearing from you.

Download document

Recommend for 

• Taking a lot of time for setting
• Not easy to notice the abnormality
• Productivity differs depending on workers' skills